How to slow the machine ?

How to slow the machine ?

Before you learn how to slow down at a car competently, without negative consequences, it is necessary to know that there is a braking way too much.However, experience shows that experienced drivers use only three of them - on the verge of braking the wheels lock, combined braking and intermittent braking.Type of inhibition and its features and independent from the electronics, which is installed in the vehicle, and the type of transmission.

Manual transmission

presence of the "mechanics" in the car during braking demands on the speed of the driver included almost simultaneously squeeze the clutch and brake.However, experienced drivers are recommended to squeeze grip for a few seconds before the brake.If you want to slow down to a certain speed, you must first pull the clutch until it stops, and then press the brake, reducing the speed to the required mark.Full stop requires the driver to stop squeezing both clutch and brake.Then it is necessary to include neutral and release the two pedals - br

ake and clutch.Doing this braking algorithm is exactly the opposite results in jamming of the car.When driving the car in neutral gear, for example, when descending a hill, there is no need for a clutch squeezing, and pressed the brake pedal - there is, if you want to slow down in this character of the vehicle.

General braking rules

To know how to slow down at a car with any transmission, you need to have certain skills in driving and to respect the rules that each motorist are required.So, if you want to slow down sharply, definitely take a look, if you have any behind the driver, which moves at a high speed.Failure to comply with this rule, the rear bumper of your car necessarily will drive behind the moving vehicle.Prohibited intense braking on bends vehicles not equipped with the ABC system.

Automatic Transmission

Have automatic drive allows the driver to brake without pressing the clutch - should only squeeze the brakes.To stop, press the brake pedal, the transmission switch handle on the «P» (parking).If necessary, continue the movement after a stop, release the brake pedal - the machine will continue to move.

braking

ice before slow down at a car in the ice, remember one rule - in this weather, do not drive at high speeds.The greater the speed of the machine, the greater its stopping distance, so be sure to avoid accidents, follow the recommended distance on the road.On the ice, it is recommended to slow down gradually, so that your car is not brought.Use the following methods of braking on a slippery surface - first downshift, but at the same time, you do not press on the brake.The machine will start to slow down, and then you can slow down already in the usual way.Moreover, it is recommended to press the brake intermittent movements.