How to make tuning ?

How to make tuning ?

If you decide to refine the look of your car, then firstly, you need to find enough information, which tells about the detailed work stages.Change the look of the car is not so much airbrushing, body painting or stickers on the sides of cars, as a chance to improve the properties of aerodynamics of your car.This will help you install body kit.When deciding how to make tuning, should think about installing a new radiator grille with a large enough cross-section holes.This will increase the saturation of the engine and the air cooler.It is also possible to manufacture the hood cover more holes.These actions will act well in the cooling capacity of the motor that will contribute to improving the dynamic and power characteristics of your car.

Tuning salon

Before you make tuning cars, you need to decide what is the first thing you will change.There are two possibilities - to change the appearance of the car, and change the cabin.For these works, you will need a material suitable for upholstery, range

of instruments, sound insulation materials, and vinyl.In order to properly take advantage of these means at hand, it is necessary to know how to make tuning salon.We need to start with improved sound insulation.This method will improve the quality of your car interior, and will continue to travel more comfortable.Noise not only deprives salon car background noise, but will also insulate the machine.After these measures, you can easily ride in a car in a winter sweater only, and not in a fur coat, hat and gloves.

  • for interior insulation is best to use high-quality materials, it is desirable to famous brands.Before you begin tuning the car interior by means of noise insulation materials, it is necessary to remove from the interior front seats and a torpedo.
  • Before laying the noise insulation material on the bottom of the car is first necessary to cover it with a protective agent that prevents corrosion.Engine compartment, it is necessary to isolate.This will provide you a quiet ride, without excessive engine noise at highway speeds.You can experiment by changing the thickness of the noise insulation panels.
  • When equipment soundproof cabin is complete, you can begin to trim the cabin.The most suitable material for the upholstery is leather, the best natural.
  • front seats are also better change.Set best new seats with anatomical support.The steering wheel can also leather-covered.
  • devices may also be updated.You can not replace everything should replace dials.It is better to install a phosphor-coated devices.They are visible in the twilight, and they will add a new dashboard view.

Tuning bumper

Before you make tuning bumper, need to determine the shape of the bumper, on the basis of the car's features.Thereafter, one can begin to give based bumper shape.All protruding parts are commonly used plywood, which is glued to the plaster.Or you can fill the inside of the bumper foam, so you can attach the bumper relief.The projections on the bumper of the best laminate.

  • better to use a separator Mold Release.It needs to be smeared on the glass, and after it has dried, apply a glass mat to the glass.Glass mat should be pre-impregnated with resin and hardener.Next, putty is applied to the automobile.You can give the desired shape bumper.
  • Next, continuing tuning bumper, you can use the scope.It is made of powder 5 l 5 l microspheres and polyester resin.Such a mixture would be a suitable substitute for car putty.Did your product will need putty several times to obtain the desired shape.
  • After that, a layer of putty check for irregularities.Future bumper surface should be smooth, so unevenness is treated with sandpaper.After the final model is ready and has the desired shape, is applied to the last layer.Newest applied gravisprey, he looks like a plaster, but has a primer function.With
  • primer gun having a nozzle diameter of 2 to 3 mm material spread across the surface of the model of the bumper.Pistol better keep a distance of about 50 cm. Because of the fact that gravisprey quickly freezes it is usually applied in several layers.Next, you need to wait for two hours.It is after this time the surface is suitable for further processing.
  • surface must be treated with sandpaper.At hand should wear gloves.Then you need to make a matrix.In such a matrix to do folds.They need to back the remains of glass fell.For manufacturing a laminate made stiffener strips having a thickness of 1 mm.In places, with rounding, set the flare.Fits flange inside the bumper, right on the automotive putty.This is a fairly time-consuming process, so you can find and watch video how to make tuning the bumper, with a phased explanation.This is especially true for workpieces bumper and give them the desired shape.

Now you know the main points of how to make their own tuning your car.This will allow you to realize your own creative ideas.And that means your iron horse will be different from all the others and you will be able to boast mastery of your friends and acquaintances may offer similar services.