Satellite television has become actual for our country.Especially popular this type of television enjoys among the population living in small towns and villages, where satellite TV is simply no alternative.Tricolor - a company that is very successful in his endeavor.The company can be called a nation-wide, as the satellite TV service it offers at affordable prices relatively low.
, however, is not so simple and smooth with satellite TV.Sometimes there are problems and, most common of them - is the lack of a signal, perhaps, each owner of a satellite TV set wondering - why not show the tricolor?
- The most common problem is the effect of natural precipitation on the quality of reception and the level of the input signal.This may occur because of several reasons.The first signal may be interrupted due to poor quality of the antenna configuration, the antenna can also simply lose - or it will cause signal loss or image may begin to "square".Simple, but also part of the problem of lack of signal - a banal damage to the cable (from the antenna to the TV).
- Another answer to the question, why not show Tricolor TV in the rain - it's a small diameter antenna installed.Usually offered standard dimensions of the antenna, however, due to the different characteristics of the terrain, can not be missed during adverse weather conditions standard antenna.
- very common problem and, at the same time, the answer to the question - why not show trikol channels - these are different obstacles in the terrain (trees in the area, the neighborhood houses or other buildings, etc.).The solution of this problem - it is reinstalling your antenna to another location, or remove obstructions.
- also sometimes cause no signal is icing on the antenna and so on.Part of the channel (or all channels) may not show due to product technical work on the satellite, in this case, you need only wait.
- Unless shows a portion of the channel, it is possible that the reason - the completion of your subscription to the channels (annual subscription), in which case you just need to pay for services and to extend the service, and the reason may be the lack of access card - make sure that your card is insertedin your receiver.
- show customer reviews company, the reason for the lack of a signal or a failure can be self receiver.To resolve such problems on the rear panel has a special switch.You can try to turn off and turn on the receiver.Some people recommend a pause in 3-5 minutes after turning off the power button and only then turn it on again.
- Unfortunately, there are cases in which you own the problem of not cope, for example, if the receiver's display shows "8888", it flickers or does not light up, then have to go to a workshop for repair of your receiver.If the screen displays "" - this means that your receiver to reset all settings (Restore factory), and we need to configure again.