How to use a pregnancy test ?

How to use a pregnancy test ?

The easiest way to determine whether a woman is in a position - is to use a special test of pregnancy, which can be easily purchased at any pharmacy.To obtain reliable results, it is necessary to use the test properly.

Using Express strips

most popular and expensive is the strip test.It includes a small set of rapid strip, to which a liquid-absorbing bag.To use this test should be as follows:

  1. Collect urine in a sterile container.
  2. Expand strip test and check for suitability: moisten first urine strip, which is present on it - it should be in color.
  3. If a rapid test is OK, place it in a container of urine to the specified mark on it for 20 seconds.
  4. Remove the strip and leave it for 5-10 minutes, so it is necessary that the urine is completely absorbed in it.
  5. Notice how many test strips to change the color, if only the control, then it means that you are not pregnant.If two color stripes are present on it, even if one of them has a weak coloration can say with a high probability that you ar
    e pregnant.

Using Tablet Test

Using Tablet pregnancy test is simple enough, while it has a high reliability, so it is very popular among women.It is sold in a set, which includes a test pipette and instruction.The process of using it consists of the following stages:

  1. Collect urine in a clean container.
  2. Open the kit and remove it from the pipette.
  3. Dial with a pipette a small amount of urine.
  4. Pull Tester from a set - it will be in the form of a plastic box with two windows, where you want to drop the piss out of the pipette.
  5. Wait about 5 minutes, and then see how many on the test strips Color.If only one, then you are not pregnant, and if two, it means that you are in position.

Using jet test

Use spray test for pregnancy is very convenient.In addition, it shows the result in just a minute.It includes a set of instructions and a jet test.Using them as necessary: ​​

  1. Expand the box to the test.
  2. Point it at the end of the stream of urine.
  3. Wait 60 seconds, and then pay attention to how many strips painted in bright shade, two indicate the presence of pregnancy, and one - on its absence.


electronic test result provides the most accurate electronic test.He reveals the pregnancy, even at a very early period.It is usually set includes 10 removable strips, which allows it to apply more than once.Using them is necessary as follows:

  1. Pull Tester of electronic packaging and substitute it by the end of the stream of urine.
  2. Wait a few minutes and then pay attention to the display of the device, if it is present "+" sign or the word "pregnant", it means that you are pregnant.Otherwise, you will see on his screen, "-" or «not pregnant».

How to get an accurate result?

to using home tests provide the most accurate results, you must observe the following rules:

  • Use only fresh urine, which is best to collect the morning.
  • Follow precisely the instructions supplied with the test kit.
  • Wait until the first days of delay.

Please note that in some cases, a pregnancy test may show an inaccurate result.This can occur for the following reasons:

  • receiving hCG medication for the treatment of infertility;
  • recently had an abortion;
  • horionepitelioma uterus;
  • poor-quality test.

You will also be useful article - How to do a pregnancy test.